37
CONTROLS AND FEATURES
English
There are three types of viewing modes.
Multi View (USB Photo)
This view allows you to search for photos in a grid format.
The pictures are displayed using thumbnail data in each
image file.
The initial highlighted position will be on the top left
thumbnail in the Multi View.
a Press B b C c to move the highlight in one window.
If all of the photos will not fit in one screen, when
pressing
C at the top left thumbnail, the screen will
move to the previous page. Conversely, when
pressing
c at the bottom right thumbnail, the screen
will move to the next page.
P
U Pu buttons can be used to page up/down the
Multi View when there are more photos than will fit
onto one screen. When the P
U Pu buttons are
pressed, the highlight shall be on the photo at the top
left of Previous/Next Multi View.
NOTE: The page down function on the last page and
page up function on the first page are not available.
b When you select a folder, press OK to move to the
next layer. Press BACK to move back to the previous
layer.
c Press OK to view the selected photo in Single View
mode.
Single View
In this mode, only files located in the selected directory will be
displayed. This view allows you to change the photo content
manually. When moving from Multi View to Single View, the
currently selected photo will be displayed.
a Press c to view the next photo. Press C to view the
previous photo.
b Press B to rotate the image 90° clockwise. Press b to
rotate the image 90° counterclockwise.
c Press to display file status information (file
number, photo title, resolution etc.).
NOTE: The information may not be correctly displayed
depending on the contents or DMS.
Slide Show
This view allows you to watch a slide show of your photos. In
this mode, only files located in the selected directory will be
played.
a To start slide show, press OK in the Single View mode.
b Press C or c to view the previous/next photo.
c Press to display file status information.
NOTE: Pressing
B or b while in the Slide Show mode will
stop the slideshow and rotate the photo.
To set Interval Time and Repeat settings:
a Press QUICK to open the Quick Menu.
b Press B or b to select either Interval Time or Repeat.
c Press C or c to adjust the setting.
NOTE: When in the DMS and Multi View modes, this feature
cannot be used.
To set Background Music (USB only)
a Press QUICK to open the Quick Menu while in the
Slide Show mode.
b Press B or b to select Background Music and press
C or c to select On.
The music file in the same folder as the displayed
photo will start playing.
NOTE: To stop music file playback, select Off in Background
Music.
Viewing photo files (on a DLNA
CERTIFIED™ Server or USB device)
To Next Page
Loading...
Need help?
General
