7
INSTALLING YOUR TV
English
The remote control
Simple at-a-glance reference of your remote control.
1 For On/Standby mode
2 To select external input sources
3 To access the analogue or digital Channel List
4 Widescreen viewing
5 Digital Subtitles
6
s Stereo/bilingual transmissions
7 Number buttons
8 Switch the Audio Description On/Off
9 To select TV Mode
10 To alter the TV volume
11 To display on-screen information
To access the index page in Text mode
12 To mute the TV sound
13 To access Quick Menu
14 To change programme positions
To change TEXT pages
15 On-screen Menus
16 To display the digital on-screen Programme Guide
17 When using menus, the arrows move the cursor on the screen
up, down, left or right. Press OK to confirm your selection
18 To return to previous Menu
19 To exit menus
20 To call up text services
22 Colour buttons: Text and interactive service control buttons
Remove the back cover to
reveal the battery
compartment and make sure
the batteries are inserted the
proper way. Suitable battery
types for this remote are AAA,
IEC R03 1.5V.
Do not combine a used, old
battery with a new one or mix
battery types. Remove dead
batteries immediately to
prevent acid from leaking into the battery compartment.
Dispose of them in accordance with instructions on page 60
of this manual.
Warning: Batteries must not be exposed to excessive heat
such as sunshine, fire or the like.
The performance of the remote control will deteriorate
beyond a distance of five metres or outside an angle of 30
degrees from the centre of the television. If the operating
range becomes reduced, the batteries may need replacing.
1
2
3
4
7
8
17
13
15
18
10
To Next Page
Loading...
Need help?
General
