43
CONTROLS AND FEATURES
English
The feature allows you to set the television to turn on
automatically to a preset channel at a certain time of day or after
a certain length of time.
a In the APPLICATIONS menu, press b to select On
Timer and press OK.
b Press B or b to select Enable On Timer and press C
or
c to select On.
c Press b to select Enable DTV Clock, and then press C
or
c to select On or Off.
d Press B or b to go through the list adding the details
of the On Timer by using the number buttons and
C
and
c to make selections.
Power On Time (only for DTV Clock On mode): Set
the time you prefer with the number buttons.
Repeat (only for DTV Clock On mode): Select the
desired On Timer operation (Once, Every Day, Mon-
Fri, Mon-Sat, Sat-Sun).
Input: Select a video input source (ATV, DTV, EXT 1,
EXT 2, HDMI 1, HDMI 2, HDMI 3 or PC).
Channel: Set the channel that will be tuned when the
television turns on.
NOTE: When an external input is selected in the Input
field, a channel cannot be selected.
Volume: Set the volume that will be applied when
the television turns on.
Time until Power On (only for DTV Clock Off mode):
Set the amount of time from now until the TV turns on
using the number buttons (maximum of 12 hours).
e Press B or b to highlight Done and press OK.
To cancel the On Timer
a In the On Timer menu, select Enable On Timer.
b Press C or c to select Off.
The television can be set to turn itself Off after a certain length of
time.
a In the APPLICATIONS menu, press b to select Sleep
Timer.
b Use the number buttons to set the desired time. For
example, to switch the television off in one and a half
hours enter 01:30, or press
c / C to increase/decrease
in steps of 10 minutes. (Maximum time setting is 12
hours)
c Press EXIT to finish.
d To cancel the Sleep Timer, enter all zeros for the
above setting.
On Timer
To Next Page
Loading...
Need help?
General
