Advanced features
119
Enter text using the software keyboard
1 Highlight the desired character on the on-screen software keyboard.
2 Press the OK button.
3 Repeat Step 1 and 2 until you have entered all desired text.
4 Select Done or press the GREEN button to save your settings and
return to the previous screen.
NOTE
If the BACK button is pressed, changes are not saved and the software
keyboard window is closed.
Input operation on the remote control:
Item: Description:
OK Inputs the selected character
0-9 These keys are used to select a character for entry.
p
/
q
/
t
/
u
Moves the character highlight
RED Deletes one character to the left of the cursor
GREEN Done
YELLOW Shortcut key for Shift
BLUE To display the help
BACK Closes the Software Keyboard window without saving changes
Using the software keyboard
To Next Page
Loading...
Need help?
General
