18 Strata DK Digital Telephone 5/99
Features
Alarm Reset
➤ To dial using a Voluntary Account Code
Alarm Reset
Your Strata DK system can be connected to a facility alarm system. All telephones produce a
startling tone whenever this alarm is activated.
➤ To reset the alarm
➤ Press $ODUP5HVHW.
1. After accessing a CO
line, press
$FFRXQW
&RGH
...or 6SHHG'LDO+
...or
if your
telephone does not
have a speed dial
button.
Your conversation is not interrupted.
Note If the Voluntary Account
Code is not required to dial
out, the account code can be
entered during a call.
2. Enter the Account
Code.
When your station is set for Verified
Account Codes, you hear a half
second confirmation tone if the code
is valid.
The outside party is not able to hear any tones (e.g.,
confirmation tones) when the Account Code digits are being
entered. If your station is programmed not to verify Account
Codes, you do not hear a confirmation tone.
If the code is invalid, you hear two
short tones.
3. Dial another account
code by repeating
Steps 1 and 2.
The last code entered is recorded.
4. Dial a telephone
number.
Any digits dialed after the code is entered in Step 2 is treated as
part of a telephone number.
NO. 204
ENTER ACCT CODE
NO. 204
CODE VERIFIED
NO. 204
CODE NOT VALID
To Next Page
Loading...
Need help?
General
