60 Strata DK Digital Telephone 5/99
Features
Speed Dial
Speed Dial
Speed Dial enables you to call a telephone number with a brief access code. There are two
types of Speed Dial numbers:
♦ Station – assigned by individual station users to their own station and can only be dialed
from the station that assigns it.
♦ System – only assigned from attendant consoles or a designated station (typically the
System Administrator’s station), and can be used by other stations. (See System
Administrator User Guide for storing instructions.)
Important! If you do not perform the following procedures within a specified time (set in
system programming for either one or three minutes) when storing speed dial
numbers, the operation times out and your telephone returns to idle mode.
➤ To store/replace a telephone number on a Station Speed Dial button
2. Speak at a normal
voice level toward the
telephone.
3. Press
6SNU to
disconnect the call.
1. With the handset on-
hook, press
5HGLDO.
2. Press the
6' you
wish to store the
telephone number on.
6' buttons are assigned in system programming.
...or
6SHHG'LDO and
enter the code that
you want to store the
telephone number in.
See Table 15 on page
111 for codes.
3. Enter the telephone
number (max. 20
digits).
To Next Page
Loading...
Need help?
General