62 Strata DK Digital Telephone 5/99
Features
Speed Dial—Advanced Features
Speed Dial—Advanced Features
Feature Access Codes
You can program 6'(Speed Dial) buttons with feature access codes for a single feature or a
sequence of features as long as the keyed dial pad characters do not exceed 20 digits. To
determine how many digits you have, count 2 digits for
&QI7UQ, [PDN] and +ROG feature
buttons and 1 digit for all other dial pad characters.
See Table 7 for a list of feature access codes.Your System Administrator can tell you which
features can be programmed on your telephone.
➤ To store a feature onto a 6' button
➤
5HGLDO
+ 6' + Feature Access Code + 5HGLDO.
♦ See Table 7 for Feature Access code sequences.
♦ 6' = the speed dial button the feature is stored on.
➤ To store a feature onto a code
➤
5HGLDO
+ 6SHHG'LDO + Speed Dial Access Code + Feature Access Code + 5HGLDO.
Important!
● Do not lift the handset.
● If you do not enter the entire sequence within a specified time (set in system programming
for either one or three minutes), the operation times out and your telephone returns to idle
mode.
● If your telephone does not have a 6S HHG'LDO , press “
” instead of Speed Dial, and enter
instead of in all feature sequences
● [PDNs] can be stored in speed dial sequences but [PhDNs] and [SDNs] cannot.
To Next Page
Need help?
General