Toshiba CT User Manual

Features
Call Transfer with Camp-on
Strata DK Digital Telephone 5/99 35
Page/Internal Call Pickup
This feature picks up Internal (station to station), Group Page, and All Call Page calls. If these
types of calls occur at the same time, the pickup priority is station-to-station and then Page
calls in the order of occurrence. In some systems this feature can be applied to pickup All Call
Page exclusively.
➤ To pickup a page or internal call
Call Transfer with Camp-on
You can transfer calls to idle or busy [DNs], Hunt Group Numbers, ACD Group [DNs], etc.
You cannot transfer (or camp-on) to a station’s [PDN] or [PhDn] if the station is in the DND
mode, unless the station’s [PDN] or [PhDN] appears on other stations.
➤ To transfer a call
2. Enter
, then the
access code
(
~) of the
group to which the
station belongs.
You are connected to the call. If the called station belongs to
more than one group, any of the Group Pickup codes
associated with those groups pickup the call.
1. Press [DN]. You hear dial tone.
2. Enter
. You are connected to the caller who originated the internal or
page call. The page circuit is released.
1. While on a call, press
&QI7 UQ.
The Line or [DN] LED flashes green (conference rate). You
hear internal dial tone.
2. Dial the [DN] where
the call will be
transferred.
The CO line rings the called station. If you hear a single tone,
you can then announce the call over the called telephone’s
speaker. (If you hear ringing tone, the call was made with Tone
Signaling.)
3. If the station is idle,
announce the call and
hang up

Toshiba CT Specifications

General

Brand	Toshiba
Model	CT
Category	IP Phone
Language	English