162
8.TROUBLESHOOTING
8
1. WHEN THE FOLLOWING MESSAGES APPEAR
When the following messages appear on the touch panel, press the [FUNCTION CLEAR] button to clear
the error message and perform the appropriate remedy for the error.
For details of messages not listed below, see the [Operator’s Manual for Basic Functions].
Message Cause Remedy
Memory overflow Memory overflowed when
scanning documents to the
memory.
Either wait for memory to be cleared, or
check the jobs and delete reserved jobs to
clear memory.
Communication error Communication error occurred
during direct TX.
Retry communications.
Job reservation full The number of reserved jobs
exceeded 100.
Either wait for job reservations to be
completed, or check the jobs and delete
reserved jobs.
Job memory full The total number of destinations
for outgoing call jobs exceeded
1,000.
Either wait for outgoing call jobs to be
completed, or check the jobs and delete
reserved jobs.
Sorry not possible On-hook or direct TX was
attempted during communications.
Wait for communications to end and retry
communications.
Not allowed now Further polling transmission
reservation was attempted even
though polling transmission was
already reserved.
Either wait for polling transmission jobs to
be completed, or check the jobs and delete
reserved jobs.
Too Many Tel # Digits 128 digits or more were registered
for a chain dial communication.
Confirm the number of digits dialed and
register the numbers again.
To Next Page
Loading...
Need help?
General