49
2
6. SENDING ORIGINALS
Memory Transmission
In the Memory Transmission mode, originals are scanned at high speed and temporarily stored in memory
before transmitting.
- Up to 100 transmissions can be reserved.
- Up to 1,000 pages can be stored in 1 transmission.
- If the original cannot be sent (the remote Fax is busy or otherwise unavailable), the remote Fax is
automatically redialed repeatedly.
- Documents can no longer be added to memory if it becomes full midway during scanning.
In this case, reduce the number of originals you are sending, or try sending in the Direct Transmission
mode. "Direct Transmission" Page 51
- If an original is placed on the original glass, the scanning conditions can be changed for each page.
"Setting the Scanning Conditions for Each Page" Page 37
1
Place the original(s).
- "Setting Originals" Page 29
2
Press the [FAX] button on the control
panel.
3
Press the [ADDRESS] button to enter the
address menu, and then press the
[OPTION] button.
4
Press the [MEMORY TX] button, set the
other transmission conditions, then press
the [ENTER] button.
- "4.SETTING THE TRANSMISSION CONDITIONS" Page 32
5
Specify the remote Faxes.
- Specifying by digital keys "Direct Entry with Digital Keys" Page
39
- Specifying by address "Address Book Entry" Page 40
- Specifying by group "Group Entry" Page 41
- Specifying by multi-address transmission "Multi-address
Transmission" Page 47
To Next Page
Loading...
Need help?
General