6 MAINTENANCE AND INSPECTION
100 Daily Inspection
Daily Inspection
We recommend a weekly cleaning of the following items to assure you the best scanning perfor-
mance:
y Be sure not to scratch the parts to be cleaned.
y Do not use solvent such as thinner or benzene to clean machinery. This could cause defor-
mation or tarnishing.
y When using chemical cleaning pads, observe the precautions pertaining to the product.
1. Scanning area
Wipe with a sheet of soft dry cloth or soft cloth dampened in water and squeezed tightly. Do
not use alcohol or solvent.
2. Original glass
3. Guides
4. Platen sheet
Clean in the following procedure according to the level of staining:
- Wipe with a soft dry cloth.
- Wipe with a soft cloth dampened in water and squeezed tightly.
- Wipe with a soft cloth dampened in alcohol and squeezed tightly, and then wipe with a
soft dry cloth.
- Wipe with a soft cloth dampened in diluted mild detergent and squeezed tightly. Then
wipe with a soft cloth dampened in water and squeezed tightly. Then wipe with a soft dry
cloth.
1
2
3
4
To Next Page
Loading...
Need help?
General
