User’s Manual 4-35
Operating Basics
Starting TOSHIBA DVD PLAYER
Use the following procedure to start "TOSHIBA DVD PLAYER".
1. Insert a DVD-Video in the DVD Super Multi drive while Windows 7 is
running. When an DVD-Video disc is set in the DVD drive, the following
application selection screen may appear. If this occurs, select Play DVD
movie, then click OK to launch the TOSHIBA DVD PLAYER.
2. Touch the CD/DVD panel on the Front operation panel. Or select Start
Æ All Programs Æ TOSHIBA DVD PLAYER to start TOSHIBA DVD
PLAYER.
Operating TOSHIBA DVD PLAYER
Notes on Using "TOSHIBA DVD PLAYER".
1. Screen display and available features may vary amongst DVD-Videos
and scenes.
2. Only operation buttons (including remote controller and Front operation
panels) which correspond to currently available and active features will
be useable during DVD playback.
3. If the menu is opened in the Display Area using the Control window's
Top Menu or Menu buttons, touch pad and mouse menu operations
may not be able to be used.
Open TOSHIBA DVD PLAYER HELP
TOSHIBA DVD PLAYER features and instructions are also explained in
detail in "TOSHIBA DVD PLAYER Help". Use the following procedure to
open "TOSHIBA DVD PLAYER Help".
■ Click the "Help" button ( ) in the Display Area.
Using WinDVD BD for TOSHIBA
Please be aware of the following limitations when you use WinDVD BD for
TOSHIBA:
Notes on use
■ "WinDVD BD for TOSHIBA" is for Blu-ray Disc playback only. DVD
playback is not supported. Please use "TOSHIBA DVD PLAYER" for
DVD playback.
Downloaded from LpManual.com Manuals
To Next Page
Loading...
Need help?
General