User’s Manual 4-37
Operating Basics
Starting WinDVD BD for TOSHIBA
Use the following procedure to start "WinDVD BD for TOSHIBA".
1. When a Blu-ray disc is set in the BD drive, WinDVD BD for TOSHIBA
starts automatically.
2. Touch the CD/DVD/BD button on the Front operation panel. Or select
Start Æ All Programs Æ InterVideo WinDVD Æ WinDVD BD for
TOSHIBA to start "WinDVD BD for TOSHIBA".
Operating WinDVD BD for TOSHIBA
Notes on Using "WinDVD BD for TOSHIBA".
1. Screen display and available features may vary amongst DVD-Videos
and scenes.
2. Only operation buttons (including remote controller and Front operation
panels) which correspond to currently available and active features will
be useable during DVD playback.
3. If the menu is opened in the Display Area using the Control window's
Top Menu or Menu buttons, touch pad and mouse menu operations
may not be able to be used.
Open WinDVD BD for TOSHIBA HELP
WinDVD BD for TOSHIBA features and instructions are also explained in
detail in "WinDVD BD for TOSHIBA Help". Use the following procedure to
open "WinDVD BD for TOSHIBA Help".
■ Click the "Help" button ( ) in the Display Area.
Media care
This section provides tips on protecting data stored on your CD/DVD/BD.
Handle your media with care. The following simple precautions will
increase the lifetime of your media and protect the data stored on them:
CD/DVD/BD
1. Store your CD/DVD/BD in the container they came in to protect them
and keep them clean.
2. Do not bend the CD/DVD/BD.
3. Do not write on, apply a sticker to, or otherwise mar the surface of the
CD/DVD/BD that contains data.
4. Hold the CD/DVD/BD by its outside edge or the edge on the centre
hole. Fingerprints on the surface can prevent the drive from properly
reading data.
5. Do not expose your CD/DVD/BD to direct sunlight, extreme heat or
cold. Do not place heavy objects on your CD/DVD/BD.
Downloaded from LpManual.com Manuals
To Next Page
Loading...
Need help?
General