User’s Manual 8-13
Optional Devices
Setting for display video on HDMI
To view video on the HDMI device, be sure to configure the following
settings. Otherwise, you may find that nothing is displayed.
Settings for audio on HDMI
To set the audio device to use the HDMI:
1. Click Start J Control Panel J Hardware and Sound J Sound J
Digital Output Device (HDMI) J Set Default Device.
To set the audio device to use the internal speakers:
1. Click Start J Control Panel J Hardware and Sound J Sound J
Speakers J Set Default Device.
i.LINK (IEEE1394)
i.LINK (IEEE1394) is used for high-speed data transfer for a range of
compatible devices such as
1. Digital video cameras
2. Hard disk drives
3. MO drives
4. CD-RW drives
■ When you connect a television or external monitor to the HDMI port
and the display output device is set to HDMI.
When you unplug the HDMI cable and re-plug it in please wait at least
5 seconds before you replug the HDMI cable again.
■ When you connect a television or external monitor to the HDMI port
and you connect the television, external monitor or external sound
device to another port.
When you change the display output or Unplug/re-plug the HDMI
cable.
The sound output device and the display output device maybe changed
automatically by the system.
■ Be Sure to use the FN + F5 hot keys to select the display device before
starting to play video. Do not change the display device while playing
video.
■ Do not change the display device under the following conditions.
■ While data is being read or written.
■ While communication is being carried out.
i.LINK uses a four-pin connector, which does not carry electric current.
External devices will need their own power supply.
Downloaded from LpManual.com Manuals
To Next Page
Loading...
Need help?
General