If the remote control is secured
(for anti theft)
14
Preparation
Using the Product for the First Time
1. Insert the battery
1
Remove the remote control
from the hanger.
Remote
control
Hanger
2
Open the battery cover and
insert two AA batteries.
Battery
cover
Close
Open
z
When batteries are properly inserted,
temperature levels appear on the display of
the remote control (back side).
When the temperature levels are not
displayed, perform step
3
of "Language
Settings" in page 50.
z
The display goes out when no button on
the remote control is pressed for about 60
seconds or more.
3
Mount the remote control in
the hanger.
■
About the batteries
x
Use dry cell, alkaline batteries.
x
Be sure to follow "Safety Precautions" to prevent
the batteries from rupturing or leaking uid, etc.
(Pages 7, 8)
1
Remove the screw from the
remote control xture.
Remove
Remote
control
Hanger
Screw
Wall
Phillips screwdriver
(View from side)
2
Remove the remote control
from the hanger.
■
To secure the remote control again
Tighten and x the screw.
(Overtightening may cause damage to parts
such as the hanger.)
To Next Page
Loading...
Need help?
General