Toto Washlet TCF4911E Series User Manual

Water Filter Drain Valve (Approximately once every 6 months)
<If you think the water pressure has weakened>
1
Close the shutoff valve.
x
The water supply stops.
CAUTION
Do not remove the water
 lter drain valve while the
shutoff valve is open.
(Otherwise, water may leak out.)
Shutoff
valve
2
Press
"Wand CLEAN" button.
x
Open the wand cover. (Release the
pressure from the water supply pipe.)
3
Switch the breaker on the
distribution board to OFF.
4
Remove the cover and
water  lter drain valve.
x
Loosen the water  lter drain valve with
a  at-head screwdriver and then pull it.
Cover
Flat-head screwdriver
Water Filter Drain Valve
5
Clean with a tool such as a
toothbrush.
x
Also, remove any dust from inside the
hole of the water  lter drain valve.
6
Reinstall the water  lter
drain valve and cover.
x
Insert the water  lter drain valve and use a
 at-head screwdriver to tighten it securely.
7
Switch the breaker on the
distribution board to ON.
x
The "Power" LED lights up.
8
Open the shutoff valve.
(Page 15)
Water Filter Drain Valve
35
Maintenance

Toto Washlet TCF4911E Series Specifications

General

Brand	Toto
Model	Washlet TCF4911E Series
Category	Toilets
Language	English