Removal of Operation Guide
How to remove the operation guide
Follow the procedure below.
1
Switch the breaker on the distribution board to OFF.
2
Remove the remote control from the hanger.
(Page 14)
3
Remove the hanger and
operation guide.
Hanger Operation guide
Phillips screwdriver
Screw
4
Screw the hanger on the wall.
5
Mount the remote control in the hanger.
6
Switch the breaker on the distribution board to ON.
•
The "Power" LED lights up.
Q
To install back the operation guide, follow the procedure above.
(Install the operation guide at step
4
.)
59
Reference
To Next Page
Loading...
Need help?
General