SST
A57096
A57097
A87943
A87965
1
2
3
5
4
7
6
8
10
13
14
11
9
12
A09624
14−6
−ENGINE MECHANICAL PARTIAL ENGINE ASSY (1CD−FTV)(From September,
2003)
1CD−FTV ENGINE REPAIR MANUAL (RM1046E)
11. REMOVE CRANKSHAFT TIMING PULLEY
(a) If the timing pulley cannot be removed by hand, use SST
to remove the pulley.
SST 09950−50013 (09951−05010, 09952−05010,
09953−05010, 09953−05020, 09954−05021)
12. REMOVE CAMSHAFT OIL SEAL RETAINER
(a) Remove the 4 bolts.
(b) Using a screwdriver, remove the oil seal retainer by prying
between the oil seal retainer and camshaft bearing cap.
13. REMOVE WATER PUMP ASSY
(a) Remove the 7 bolts, water pump and gasket.
14. REMOVE CAMSHAFT
(a) Using several steps, loosen and remove the 14 bearing
cap bolts uniformly in the sequence shown in the illustra-
tion.
(b) Remove the 5 bearing caps and camshaft sub−assembly.
15. REMOVE NO.2 CAMSHAFT
(a) Remove the camshaft sub−assembly and camshaft carri-
er.
ProCarManuals.com
To Next Page
Loading...
Need help?
General
