0-220-22
3-Way catalytic
converter system
Exhaust gas concentration measurement
(carbon monoxide and hydrocarbon)
M ←←←
Exhaust system piping looseness and damage I
Vacuum piping damage I ←←←
Vacuum sensor damage I
Coolant temperature sensor damage I
Injector damage and cleaning (LPG vehicle) I
Register damage (LPG vehicle) I
Travel and load
handling control
Actuator damage I ←←
Axle pedal sensor and switch damage I ←←
Traveling speed sensor damage I
POWER TRANSMISSION SYSTEM
Differential
Leak I ←←←
Oil level I ←←←
Bolt loosening T
Torque
converter &
transmission
Leak I ←←←
Fluid level I ←←←
Operating mechanism function and looseness I ←←←
Control valve and clutch functions I ←←←
Inching valve function I ←←←
Stall and hydraulic pressure measurement M ←
Propeller shaft
and axle shaft
Loose joint T ←←
Looseness at spline connections I
Looseness of universal joint I
Twisting and cracks of axle shaft I
DRIVE SYSTEM
Wheels
Tire inflation pressure M ←←←
Tire cuts, damage and uneven wearing l ←←←
Loose rim and hub nuts T ←←←
Tire groove depth M ←←←
Metal chips, pebbles and other foreign matter
trapped in tire grooves
l ←←←
Wheels
Rim, side bearing and disc wheel damage I ←←←
Abnormal sound and looseness of front wheel
bearing
I ←←←
Abnormal sound and looseness of rear wheel
bearing
I ←←←
Front axle Cracks, damage and deformation of housing I
Rear axle
Cracks, damage and deformation of beam I
Looseness of axle beam in vehicle longitudinal
direction
M
Inspection Period Every
6 weeks
Every
3 months
Every
6 months
Every
12 months
Item
Every
250 hours
Every
500 hours
Every
1000 hours
Every
2000 hours
To Next Page
Loading...
Need help?
General
