2. How to read component figures
3.
Matters omitted from this manual
(1) This manual omits descriptions of the following jobs, but
perform them in actual operation:
(1) The component figures use the illustration in the parts
(Example)
Parts catalog
f
FIG
number
catalog for the vehicle model. Please refer to the catalog
to check the
art
name.
(a) Cleaning and washing of removed parts as required
3201
(b) Visual inspection (partially described)
TERMINOLOGY
Warning:
ltems that may lead to an injury to either the operator or another person, and items and operation points
which, if not followed, may lead to an injury or accident.
Caution:
ltems that must not be performed because doing so will result in damage to the vehicle or it's components,
and items in the operation to which special attention should be paid.
Note:
Supplemental explanations for performing the operation easily.
Standard: Value showing the allowable range in inspection or adjustment.
Limit:
The maximum or minimum value allowed in inspection or adjustment.
To Next Page
Loading...
Need help?
General
