158
3-6. Favorite settings
3-6.Favorite settings
*
: If equipped
When all of the following have
been performed, the driver’s
seat is automatically adjusted to
a position that allows driver to
enter and exit the vehicle easily.
The shift position has been
shifted to P.
The power switch has been
turned to OFF.
The driver’s seat belt has
been unfastened.
When any of the following has
been performed, the driver’s
seat automatically returns to its
original position.
The power switch has been
turned to ACC or ON.
The driver’s seat belt has
been fastened.
■ Operation of the power easy
access system
● When exiting the vehicle, the
power easy access system may
not operate if the seat is already
close to the rearmost position, etc.
● If the seat position is adjusted
Driving position mem-
ory
*
This feature automatically
adjusts the positions of the
driver’s seat to make enter-
ing and exiting the vehicle
easier or to suit your prefer-
ences.
When My Settings is turned
on:
Driving positions for the
registered drivers (3 pat-
terns) and guest (1 pattern)
can be registered in My Set-
tings.
When electronic key assign-
ment is registered for My
Settings, the driving posi-
tion for each driver can be
recalled (memory recall
function).
When My Settings is turned
off:
Up to 2 different driving
positions can be recorded.
Each electronic key can be
registered to recall your pre-
ferred driving position
(memory recall function).
For details about My Set-
tings, refer to P.162.
Enabling easier driver
entry and exit (power easy
access system)
To Next Page
Loading...
Need help?
General
