448
6-3. Do-it-yourself maintenance
1 Turn the power switch off.
2 Open the fuse box cover.
Engine compartment
Push claw and to com-
pletely release the lock, and then lift
up the cover.
Left side instrument panel
Remove the lid.
■ To prevent battery explosion
or leakage of flammable liq-
uid or gas
● Replace the battery with a new
battery of the same type. If a
wrong type of battery is used, it
may explode.
● Do not expose batteries to
extremely low pressure due to
high altitude or extremely high
temperatures.
● Do not burn, break or cut a bat-
tery.
■ When replacing the battery
Use a flathead screwdriver of
appropriate size. Applying exces-
sive force may deform or damage
the cover.
■ For normal operation after
replacing the battery
Observe the following precautions
to prevent accidents:
● Always work with dry hands.
Moisture may cause the battery
to rust.
● Do not touch or move any other
component inside the remote
control.
● Do not bend either of the battery
terminals.
Checking and replac-
ing fuses
If any of the electrical com-
ponents do not operate, a
fuse may have blown. If this
happens, check and replace
the fuses as necessary.
Checking and replacing
fuses
A
To Next Page
Loading...
Need help?
General
