TOYOTA MY22 TUNDRA 2022 - DASHCAM (Digital Video Recorder)
Procedure
For Dealer Installations / No 3D Hard
Template Available:
(g) Using scissors, cut the paper template as
indicated. For PPO Installations, please
use 3D hard template provided.
(h) Referencing the TSS cover, align to the
indicated line and affix the template to
the windshield using tape. (Fig. 4-5)
(i) Remove adhesive and stick mounting
plate on windshield paying attention to
the reference lines on template. Press
firmly to reduce visible air pockets. Note
that the narrow end of the plate is
towards the top of the windshield.
(Fig. 4-6)
(j) Once the base plate is fitted, remove
template in the direction towards the
lower edge of the windshield and clean
any tape residue from the glass.
All Installation types continue from here
onwards.
5. Remove Visor Mount Clips and Base
(a) Remove the Sun Visor Hooks on Driver
side of the Map Light Console, to allow
for gentle pulling down of the headliner
without damage.
(1) Twist the Visor Hook Anti-Clockwise
and pull down to release hook
component. (Fig. 5-1)
(2) After removing the hook component,
release the two tabs and pull out the
base, needle nose pliers
recommended.
Fig. 4-5
Fig. 4-6
Fig. 5-1
To Next Page
Loading...
Need help?
General
