TOYOTA MY22 TUNDRA 2022 - DASHCAM (Digital Video Recorder)
Procedure
8. Fitting the Dashcam to Base Plate
NOTE: The Hang Tag that is attached to the
Dashcam is only to be removed by the
end user. As the camera turns on with
ignition, the hang tag is intended to block
recording while the vehicle is being
processed through areas which may be
confidential / contain unreleased vehicles.
Do NOT remove the hang tag, please
handle it with care to prevent accidental
removal. (Fig. 8-1)
(a) IMPORTANT: DO remove the Semi-
Transparent Blue Film protective cover
from the camera lens before fitting the
camera to the vehicle. Handle the
camera with care after removing. Ensure
the film cover is not left behind in the
vehicle and is properly discarded.
(Fig. 8-2)
NOTE: Observe the shape of the T-hook
features for the Dashcam to lock on to. The
hooks face upwards towards the headliner.
(Fig. 8-3)
(b) The Dashcam is affixed to the window by
sliding on to these 4 T-hooks and
allowing the clip to engage. (Fig. 8-4)
Fig. 8-1
Fig. 8-2
Fig. 8-3
To Next Page
Loading...
Need help?
General
