EasyManuals Logo
Home>TP-Link>Wireless Router>TD-W8961ND

TP-Link TD-W8961ND User Manual

TP-Link TD-W8961ND
87 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in
which case the user may be required to take adequate measures.
National Restrictions
This device is intended for home and office use in all EU countries (and other countries following
the EU directive 1999/5/EC) without any limitation except for the countries mentioned below:
Country Restriction Reason/remark
Bulgaria None
General authorization required for outdoor use and
public service
France
Outdoor use limited to 10
mW e.i.r.p. within the band
2454-2483.5 MHz
Military Radiolocation use. Refarming of the 2.4 GHz
band has been ongoing in recent years to allow current
relaxed regulation. Full implementation planned 2012
Italy None
If used outside of own premises, general authorization is
required
Luxembourg None
General authorization required for network and service
supply(not for spectrum)
Norway Implemented
This subsection does not apply for the geographical area
within a radius of 20 km from the centre of Ny-Ålesund
Russian Federation None Only for indoor applications
Note: Please don’t use the product outdoors in France.
This device has been designed to operate with the antennas listed below, and having a maximum
gain of 3 dBi. Antennas not included in this list or having a gain greater than 3 dBi are strictly
prohibited for use with this device. The required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for
successful communication.

Other manuals for TP-Link TD-W8961ND

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link TD-W8961ND and is the answer not in the manual?

TP-Link TD-W8961ND Specifications

General IconGeneral
VPN supportPPTP, L2TP, IPSec
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Bandwidth2.4835 GHz
Input current1 A
Input voltage12 V
Rack mountingNo
Dimensions (WxDxH)195 x 135 x 39 mm
Filtering descriptionIP, Packet, Application, URL
Operating temperature (T-T)32 - 104 °F
Compliance industry standardsIEEE 802.3, 802.3u
WLAN data transfer rates supported300 Mbit/s
Non-operating relative humidity (non-condensing)10 - 90 %
DHCP client-
Supported network protocolsPPPoE, PPPoA, IPoA
RJ-11 ports quantity1
Ethernet LAN (RJ-45) ports4
Security algorithms128-bit WEP, 64-bit WEP, WPA-AES, WPA-PSK, WPA-TKIP, WPA2-PSK
Storage temperature (T-T)-40 - 70 °C
Storage relative humidity (H-H)5 - 90 %
DSL specificationANSI T1.413 Issue 2, ITU-T G.992.1, ITU-T G.992.2, ITU-T G.994.1, ITU-T G.992.3, ITU-T G.992.4, ITU-T G.992.5
Antennas quantity2
Antenna connector typeRP-SMA
Antenna gain level (max)3 dBi
Weight and Dimensions IconWeight and Dimensions
Weight- g

Related product manuals