Installation - Mechanical
CLCH-SVX07K-EN 59
Pipe Cabinet Installation
Nested U channels and L angle have to be removed to
install the pipe cabinet to the unit and reinstall per
hurricane certification guidelines. See Figure 85.
1. Remove the fasteners from the top of the nested U
channel.
2. Remove the U channel from the unit base L angle and
the pipe cabinet base L angle.
3. Remove the corner fasteners from the pipe cabinet
base and the unit base L angle. These fasteners are not
required to be put back.
Figure 85. Pipe cabinet installation for hurricane applications
To Next Page
Loading...
Need help?
General
