40
BAS-SVX078E-EN
• Alert history; cleared alerts of the last 30 days.
From both screens, an alert code can be selected and get additional information on the alert as well as a
list of possible causes.
Note: Each alert has a date/time stamp of when the alert was nullified. The date/time stamp for current
alerts occurs when the alert was declared. For alert history, the date/time stamp is when the alert
was nullified.
All alerts are categorized by severity:
• Critical
– Loss of heating/cooling operation.
– Service call required.
– Alert messages displayed on the home screen. When closed, a flashing red icon indicates the
alert condition.
• Major
– Reduced functionality; minimum operation is possible.
– Service call is not immediately required.
– Alert messages displayed on the home screen, but a yellow icon indicates the alert condition.
Note: Critical/major alerts can be displayed on the home screen by pressing the alert icon on the
shortcut tool bar. Diagnostics are accessed by navigating to Service Menu > Diagnostics.
• Normal
– Functionality may be lost, but should recover or the information is for diagnostic purposes/
performance monitoring.
– Service call not required.
– Normal alerts are only displayed on the diagnostic screen.
History
History allows the technician to view cycle count and runtime data for each mode and stage of operation
of the system. History is accessed by navigating to Service Menu > History. Refer to the example
below.
System Report
The system report provides technicians with important system operational data in one screen. The data
is in real time and updates as the data changes. System Reports is accessed by navigating to Service
Menu > System Reports. The system report lists:
• System Status; mode and stage of operation
• Load Value
• Fan Status
Diagnostics
To Next Page
Loading...
Need help?
General
