RTAA-SVX01A-EN 145
Unit Wiring
Typical field connection diagrams, electrical schematics and connection
diagrams for 70 -125 Ton RTAA units of “AO” design sequence are shown on
the following pages.
NOTE: The typical wiring diagrams in this manual are representative of “AO”
design sequence units and are provided only for general reference. These
diagrams may not reflect the actual wiring of your unit. For specific electrical
connection and schematic information, always refer to the wiring diagrams
which were shipped with your unit.
Unit Electrical Data
To determine the specific electrical characteristics of a particular chiller,
always refer to the nameplates mounted on the unit..
Table 22 Legend
Drawing Number Description
Page
2307-3327 Schematic Page 1 146
2307-3328 Schematic Page 2 - Low Ambient 148
2307-6516 Schematic Page 2 - Std Ambient 150
2307-3329 Schematic Page 3 - Package Units 152
2307-6472 Schematic Page 3 - Remote Evap Units 154
2307-3330 Schematic Page 4 - Package Units 156
2307-6046 Schematic Page 4 - Remote Evap Units 158
2307-3331 Schematic Page 4 - Package Units Low Ambient 160
2307-6519 Schematic Page 4 - Package Units Std Ambient 162
2307-6047 Schematic Page 5 - Remote Evap Units 164
2307-3325 Field Wiring Page 1 - Package Units 166
2307-6048 Field Wiring Page 1 - Remote Evap Units 168
2307-6543 Field Wiring Page 2 - Package Units 170
2307-3326 Component Location 172
2307-6049 Component Location - Remote Evap (Outside) 174
2307-6463 Component Location - Remote Evap (Inside) 176
To Next Page
Loading...
Need help?
General
