106
Maintenance and Adjustment
Speed Triple R
1. Rebound damping adjuster
The rebound damping adjuster is located at
the top of the right hand fork.
To change the rebound damping force, rotate
the adjuster clockwise to increase, or
anti-clockwise to decrease using a 3 mm allen
key. Always count the number of clicks from
the fully clockwise position noting that the
first stop (click position) is counted as zero.
Note:
• The motorcycle is delivered from
the factory with the rebound set at
10 clicks from the fully clockwise
position.
Compression Damping Adjustment
Speed Triple
1. Compression damping adjuster
The compression damping adjuster is located
near the bottom of both forks, adjacent to the
wheel spindle.
To change the compression damping force,
rotate the slotted adjuster clockwise to
increase, or counter-clockwise to decrease.
Always count the number of counter-
clockwise turns from the fully clockwise
position and set both forks to the same
settings.
Note:
• The motorcycle is delivered from
the factory with the compression
damping set at 1.5 counter-
clockwise turns from the fully
clockwise position.
1
chcy_1
To Next Page
Loading...
Need help?
General
