99
Maintenance and Adjustment
Brake Fluid Level Inspection and
Adjustment
1. Front brake fluid reservoir, upper
level line
2. MIN level line
The brake fluid level in the reservoirs must be
kept between the MAX and MIN level lines
(reservoir held horizontal).
Remove the safety clip (front only).
Remove the reservoir cover.
Fill the reservoir to the upper level line using
new DOT 4 fluid from a sealed container.
Install the reservoir cover ensuring that the
diaphragm seal is correctly fitted. Tighten the
cap retaining screws to 8.9 lbf in (1 Nm).
1. Rear brake fluid reservoir
2. Upper level
3. Lower level line
1
2
jajc_1
If there has been an appreciable drop in
the level of the fluid in either fluid
reservoir, consult your authorized Triumph
dealer for advice before riding. Riding with
depleted brake fluid levels, or with a brake
fluid leak is dangerous and will cause
reduced brake performance potentially
leading to loss of motorcycle control and
an accident.
To Next Page
Loading...
Need help?
General
