Triumph Speed Triple User Manual

28
General Information
Press and release button 'A' until the desired
display is visible. The display will scroll
through in the following order:
• mpg - Imperial gallons;
• mpg US - US gallons;
• L/100 km - Metric;
•km/L - Metric.
Models without TPMS: Press button 'B'
and do not touch buttons 'A' or 'B' again until
UnitS is visible in the display screen. When
UnitS is visible in the display screen, press
and release button 'A' until r
Eturn is visible
then press button 'B'. Trip 1 will be visible in
the display screen.
Models with TPMS: Press button 'B' and do
not touch buttons 'A' or 'B' again until PSI or
bAr is displayed. Press and release button 'A'
until the desired tire pressure units are visible.
Press button 'B' and wait until UnitS is
displayed, then press button ’A’ and when
r
Eturn is displayed press button B. Trip 1 will
be visible in the display screen.
ABS Disable (models with
ABS only)
It is possible to temporarily disable the ABS
system. The ABS system cannot be
permanently disabled, it will be enabled
when the ignition switch is turned off and
then on again.
To Diable the ABS
To access the ABS Disable function, turn the
igniton to the ON position.
Press and release button 'A' until set up is
visible in the display screen then press button
'B'.
Press and release button 'A' until ABS is
visible.
Pressing button 'B' will disable the ABS
system; the message ABS OFF will be
displayed for 2 seconds, and the ABS
warning light will be illuminated.
To Enable the ABS
To enable the system again, turn the ignition
off and on.
Warning
If the ABS is disabled, the brake system will
function as a non-ABS braking system. In
this situation braking too hard will cause
the wheels to lock, and may result in loss of
control and an accident.

Triumph Speed Triple Specifications

General

Brand	Triumph
Model	Speed Triple
Category	Motorcycle
Language	English