Triumph Speed Triple User Manual

26
General Information
Clock Adjustment
To reset the clock, with the motorcycle
stationary and in neutral turn the ignition to
the ON position. Press and release button 'A'
until set up is visible in the display screen.
Press button 'B' and t-SEt will be visible.
Press button 'B' again and either 24 Hr or
12 Hr clock will be shown. Press button 'A' to
select the desired clock display and then
press button 'B'. The hour display will start to
flash and the word Hour is visible in the
display screen.
To reset the hour display, ensure that the
hour display is still flashing and the word
Hour is visible. Press button 'A' to change the
setting. Each individual button press will
change the setting by one digit. If the button
is held, the display will continuously scroll
through in single digit increments.
When the correct hour display is shown,
press button 'B'. The minutes display will
begin to flash and the word Min is visible in
the display screen. The minutes display is
adjusted in the same way as for the hours.
Once both hours and minutes are correctly
set, press button 'B' to confirm and t-SEt will
be visible in the display screen. Press and
release button 'A' until r
Eturn is visible then
press button 'B'. Trip 1 will be visible in the
display screen.
1. C l o c k d i s p l a y
2. Hours read-out
3. Minutes read-out
4. Display screen (Hour selected for
adjustment)
5. Button A
6. Button B
Warning
Do not attempt to adjust the clock with the
motorcycle in motion as this may lead to
loss of motorcycle control and an accident.
5
cfiq_12
2
3
4
1
6

Triumph Speed Triple Specifications

General

Brand	Triumph
Model	Speed Triple
Category	Motorcycle
Language	English