38
General Information
The tire pressure monitoring system (TPMS)
is an accessory installed item and must be
installed by your authorized Triumph dealer.
The TPMS display on the instrument pack
will only be activated when the system has
been installed.
An adhesive label will be installed to the
wheel rim to indicate the position of the tire
pressure sensor which is near the valve.
Tire Pressure Sensor
This device complies with part 15 of the FCC
Rules.
Operation is subject to the following two
conditions:
• This device may not cause harmful
interference;
• This device must accept any
interference received, including
interference that may cause
undesired operation.
Changes or modifications to the device could
void the user's authority to operate the
equipment.
Tyre Pressure Sensor Serial Number
An ID number for each tyre pressure sensor
is printed on a label which is on the sensor.
This number may be required by the dealer
for service or diagnostics.
If the TPMS has been fitted at the factory,
labels identifying the front and rear TPMS
sensor ID numbers will be affixed to the
spaces below.
If the TPMS is being fitted to the motorcycle
as an accessory, ensure that the dealer
records the front and rear TPMS sensor ID
numbers in the spaces provided below.
To Next Page
Loading...
Need help?
General
