Triumph Speed Triple User Manual

64
How to Ride the Motorcycle
Warning
For your safety, always exercise extreme
caution when braking, accelerating or
turning as any improper action can cause
loss of control and an accident.
Independent use of the front or rear brakes
reduces overall braking performance.
Extreme braking may cause either wheel
to lock, reducing control of the motorcycle
and causing an accident.
When possible, reduce speed or brake
before entering a turn as closing the
throttle or braking in mid-turn may cause
wheel slip leading to loss of control and an
accident.
When riding in wet or rainy conditions, or
on loose surfaces, the ability to maneuver
and stop will be reduced. All of your
actions should be smooth under these
conditions. Sudden acceleration, braking or
turning may cause loss of control and an
accident.
Warning
When descending a long, steep gradient,
use engine braking by down-shifting and
use the brakes intermittently. Continuous
brake application can overheat the brakes
and reduce their effectiveness.
Riding with your foot on the brake pedal
or your hands on the brake lever may
actuate the brake light, giving a false
indication to other road users. It may also
overheat the brake, reducing braking
effectiveness.
Do not coast with the engine switched off,
and do not tow the motorcycle. The
transmission is pressure-lubricated only
when the engine is running. Inadequate
lubrication may cause damage or seizure
of the transmission, which can lead to
sudden loss of motorcycle control and an
accident.

Triumph Speed Triple Specifications

General

Transmission	6-speed
Engine Type	Liquid-cooled, 12-valve, DOHC, in-line 3-cylinder
Front Suspension	Öhlins 43mm NIX30 upside down forks, adjustable compression, rebound and preload
Rear Suspension	Öhlins monoshock, adjustable compression, rebound and preload
Front Brakes	twin 320mm floating discs
Rear Brakes	Brembo single piston caliper, 220mm disc
Fuel Tank Capacity	15.5 litres

Summary

FOREWORD

Warnings, Cautions and Notes

Explains warning, caution, and note symbols used in the handbook.

FOREWORD - SAFETY FIRST

Foreword - Safety First

Helmet and Clothing

Emphasizes wearing proper protective gear like helmets and clothing for safety.

GENERAL INFORMATION

Instrument Panel Layout

Identifies all indicators, displays, and controls on the instrument panel for operation.

General Information

ABS Disable (models with ABS only)

Details how to temporarily disable the ABS system for specific situations.

Tire Pressure Monitoring System (TPMS)

Details the TPMS function, its sensor operation, and warnings.

Warning Lights

Explains various warning lights like turn signals, high beam, low fuel, and neutral indicators.

Engine Management System Malfunction Indicator Light

Explains the malfunction indicator light and its implications for engine performance.

ABS (Anti-Lock Brake System) Indicator light

Details the ABS warning light, its normal flashing, and fault indication.

Ignition Key

Explains the function of the ignition key, transponder, and security.

Ignition Switch/Steering Lock

Describes the ignition switch positions and steering lock operation for security.

Right Handlebar Switches

Identifies and explains the engine stop switch and starter button.

Left Handlebar Switches

Identifies and explains headlight dimmer, turn signal, horn, and pass buttons.

Fuel Requirement/Refuelling

Details fuel grade requirements and recommendations for optimal performance.

Breaking-In

Daily Safety Checks

HOW TO RIDE THE MOTORCYCLE

Braking

Provides essential instructions for effective and safe braking using both brakes.

How to Ride the Motorcycle

ABS (Anti-Lock Brake System) Models only

Explains ABS operation, the warning light, and its limitations.

Parking

Considerations for High-Speed Operation

Discusses potential hazards and requirements for high-speed riding.

Tires

ACCESSORIES AND LOADING

MAINTENANCE AND ADJUSTMENT

Scheduled Maintenance

Stresses importance of scheduled maintenance for safety and reliability.

Maintenance and Adjustment

Engine Oil

Explains the importance of maintaining correct engine oil level and changes.

Oil Level Inspection

Oil and Oil Filter Change

Provides instructions for changing engine oil and oil filter.

Cooling System

Coolant Level Inspection

Throttle Control

Inspection

Clutch

Drive Chain

Chain and Sprocket Wear Inspection

Disc Brake Fluid

Discusses brake fluid type, hygroscopic nature, and replacement needs due to moisture.

Steering/Wheel Bearings

Inspecting the Steering (Steering Head) Bearings for Free Play

Front Suspension

Suspension Setting Chart - Speed Triple

Front Suspension Settings

Rebound Damping Adjustment

Compression Damping Adjustment

Rear Suspension Adjustment

Tire Wear

Tire Replacement

Fuse Boxes

Headlights

Headlight Bulb Replacement

Maintenance and Adjustment

Brakes

Covers brake wear inspection and new pad/disc break-in procedures.

Maintenance and Adjustment

Battery

Discusses battery safety precautions, handling, charging, and potential hazards.

Specifications

Tires

Lists tire pressures, sizes, and approved tire models for the motorcycle.