118
Maintenance and Adjustment
Unpainted Aluminum Items
Items such as brake and clutch levers must
be correctly cleaned to preserve their
appearance.
Use a proprietary brand of aluminum cleaner
which does not contain abrasive or caustic
elements.
Clean aluminum items regularly, in particular
after use in inclement weather, where the
components must be hand washed and dried
each time the machine is used.
Warranty claims due to inadequate
maintenance will not be allowed.
Cleaning of the Exhaust System
All parts of the exhaust system of your
motorcycle must be cleaned regularly to
avoid a deterioration of its appearance. These
instructions can be applied to chrome,
brushed stainless steel and carbon fiber
components alike.
Note:
• The exhaust system must be cool
before washing to prevent water
spotting.
Washing
Prepare a mixture of cold water and mild
automotive cleaner. Do not use a highly
alkaline soap as commonly found at
commercial car washes because it leaves a
residue.
Wash the exhaust system with a soft cloth. Do
not use an abrasive scouring pad or steel
wool. They will damage the finish.
Rinse the exhaust system thoroughly.
Ensure no soap or water enters the exhausts.
Drying
Dry the exhaust system as far as possible with
a soft cloth. Do not run the engine to dry the
system or spotting will occur.
Protecting
When the exhaust system is dry, rub
'Motorex 645 Clean and Protect' into the
surface.
It is recommended that regular protection be
applied to the system as this will both protect
and enhance the system's appearance.
To Next Page
Loading...
Need help?
General
