50
General Information
Safe Operation
Daily Safety Checks
Check the following items each day before
you ride. The time required is minimal, and
these checks will help ensure a safe, reliable
ride.
If any irregularities are found during these
checks, refer to the Maintenance and
Adjustment section or see your authorized
Triumph dealer for the action required to
return the motorcycle to a safe operating
condition.
Check:
Fuel: Adequate supply in tank, no fuel leaks
(page 36).
Engine Oil: Correct level on dipstick. Add
correct specification oil as required. No leaks
from the engine or oil cooler (page 75).
Drive Chain: Check drive chain for correct
adjustment and lubrication (page 85).
Tires/Wheels: Correct inflation pressures
(when cold). Tread depth/wear, tire/wheel
damage, punctures etc. (page 99).
Nuts, Bolts, Fasteners: Visually check that
steering and suspension components, axles,
and all controls are properly tightened or
fastened. Inspect all areas for loose/damaged
fasteners.
Steering Action: Smooth but not loose from
lock to lock. No binding of any of the control
cables (page 94).
Brakes: Pull the brake lever and push the
brake pedal to check for correct resistance.
Investigate any lever/pedal where the travel is
excessive before meeting resistance, or if
either control feels spongy in operation
(page 88).
To Next Page
Loading...
Need help?
General
