Triumph Trident User Manual

GENERAL INFORMATION
73
Seat Removal and Installation
Warning
To prevent detachment of the seat
during riding, after installation always
grasp the seat and pull firmly
upwards.
If the seat is not correctly secured in
the lock, it will detach from the lock.
A loose or detached seat may cause
loss of motorcycle control and an
accident.
To remove the seat:
▼ Insert the ignition key into the seat
lock and turn it counterclockwise.
This will release the seat from its
lock.
▼ Slide the seat upwards and
rearwards for complete removal from
the motorcycle.
To reinstall the seat:
▼ Engage the seat's tongue
underneath the bracket near the fuel
tank.
▼ Line up the hinges and press down
at the rear to engage the seat lock.
An audible click can be heard when
the seat is fully engaged into its lock.
Windshield (if equipped)
Warning
Never attempt to clean the windshield
while riding the motorcycle.
Removal of the rider's hands from the
handlebars while riding the motorcycle
will diminish the ability of the rider to
maintain the control of the
motorcycle.
Attempting to clean the windshield
while riding the motorcycle may result
in loss of motorcycle control and an
accident.
Warning
Make sure that the windshield is
adjusted to the same position on both
sides.
Riding the motorcycle with an
incorrectly adjusted windshield could
cause loss of motorcycle control and
an accident.
The windshield installed on the
Tiger Sport can be manually adjusted
without the use of tools.
1
1. Height adjustment handle

Triumph Trident Specifications

General

Brand	Triumph
Model	Trident
Category	Motorcycle
Language	English