Index-4 Electrostatic Classifier Model 3082 and SMPS Spectrometer Model 3938
notes
create, 5-23
O
operating classifier, 5-2
operating in classifier mode, 5-7
operating in smps mode, 5-10
operating precautions, 5-1
operation, 5-1
external control mode, 5-51
optical radiation warning, v, vi
orifice, 6-4
O-ring, 6-7
face-seal, 6-5
flag assembly, changing, 6-7
greasing, 6-6
radial, 6-5
replacing, 6-4, 6-6
out of range warning, 5-48
overpressure mode, 1-3
P–Q
packing list, 2-1
particle counter, 1-10
particle detector, 1-10
particle diameter, 5-8, 5-9
current setpoint, 5-8
particle diameter field, 5-8
particle mobility theory, B-11
performing ISO zero test, 6-21
peripheral hardware
view properties, 5-24
polydisperse aerosol, 1-3
polydisperse flow, A-3
polydisperse flow outlet port, 2-7,
2-10, 2-13
polydisperse flow port, 2-31
polydisperse submicrometer aerosol,
1-3
power on, 2-38
power requirements, A-2, A-3
product registration, 0-3
properties, 5-19
flow tab, 5-19
gas tab, 5-26
hardware tab, 5-24
scan tab, 5-20, 5-22
properties shortcut button, 5-11
purge field, 5-21
R
radiation label, ix
radiation safety, vi
radioactive icon, 5-4
radioactive material warning, vii, 4-1
radioactive pop-up flag, 2-12
radioactive warning, v
raw data, 5-35
read commands, C-3
reader’s comments sheet
recommended cleaning solutions, 6-2
reference flowmeter, 5-43
reference gas properties button, 5-27
references, B-21
related literature, xviii
remove cover, 6-8
replacing flowmeter, 6-11
replacing inline filters, 6-9
resetting factor defaults, 5-48
restore factory defaults, 5-49
restore factory screen, 5-49
retrace field, 5-21
retrace time, 6-29
return to local control, 5-51
returning instrument for service, 6-31
ribbon cable, 6-11
S
safety, v
chemical, vii
electrical, viii
labels, viii, ix
laser, vi
radiation, vi
sample interval data export file, 5-35
sample raw data export file, 5-36
sample time stamps in Aerosol
Instrument Manager software
export files do not match expected
actual time, 6-30
saved logged data, 5-38
scan field, 5-21
scan options, 5-20, 5-22
scan size range min/max, 5-13
scan statistics pane, 5-16
scan status bar, 5-15
scan tab, 5-20, 5-22
Scanning Electrical Mobility
Spectrometer (SEMS), B-2
schedule tab
external trigger, 5-23
note, 5-23
number of samples, 5-22
only once/repeat every (toggle),
5-22
scan time, 5-22
scans per sample, 5-22
start time, 5-22
total sample time, 5-22
schematic
Electrostatic Classifier with 1nm-
DMA, B-7
Electrostatic Classifier with long
DMA, B-6
Electrostatic Classifier with nano
DMA, B-7
screen calibration, 5-29
serial number label, ix
serial RS-232, 4-10
service, 6-32
shipping caution, 6-32
service label, ix
setting date and time, 5-28
setting gas properties, 5-26
setting properties, 5-19
settings
view settings, 5-17
setup, 2-5
setup screen, 5-18
setup screen options
calibration, 5-18
data export, 5-18
device, 5-18
logging options, 5-18
properties, 5-18
sheath flow, 5-8, 5-39, A-2, A-3
calibrate, 6-25
setting, 5-8
sheath flow controller, 1-5
sheath flow error, 6-26
sheath flow fitting, 2-31
sheath flow loop, 4-8
components, 4-8
blower, 4-8
filter manifold, 4-8
flow manifold, 4-8
flowmeter, 4-8
heat exchanger and fan, 4-8
HEPA filter, 4-8
sensor, 4-8
sheath flow rate icon, 5-4
sheath flow screen, 5-40
sheath flow warning, 6-27
sheath pressure error, 6-27
sheath temp does not match cabinet
temp, 6-28
shipping, 3-1
neutralizer, 3-2
packing, 3-5
preparing, 3-2
removing lead shielding, 3-4
truss-head screw, 3-2
warning, 3-1
shutoff, 5-53
side panel, 4-4
side-support bracket, 2-24, 2-26
size distribution corrections, 5-4
size range
maximum, 5-21
SMPS, 2-16
SMPS measurement theory, B-15
smps mode, 5-10
SMPS mode, 5-2
SMPS spectrometer
accessory kit, 2-2
caution, 5-3, 5-53
configuration setup, 2-5
hardware configuration, 5-24
ISO zero test, 6-23
optional accessories, 2-4
replacement parts, 2-4
SMPS spectrometer measurements,
4-7
soft x-ray neutralizer, B-11
software
license, iv
To Next Page
Loading...
Need help?
General
