TSI Instruments dusttrak II 8530 User Manual

Chapter 3
42
Connect the External Pump Module to the DustTrak monitor and then try
again. TSI recommends powering down the DustTrak monitor before
connecting the External Pump Module to the DustTrak monitor. Connect the
power cable and the flow tubing between the DustTrak monitor and the
External pump module, as applicable.
While taking a measurement the screen will display the current measured
mass concentration. The various regions of the screen are shown below.
Screen Regions
Mass Reading
Shows the instruments mass measurements.
Run Mode Region
Shows the run mode selected from the
RunMode screen.
File Name Region
Displays the file name to which the data is
currently being saved.
Test Progress Region
Shows the time-based progress of the test.
Error Indicator Region
Shows the current stats of the instrument
STEL: Shows if STEL is in progress (desktop
instruments only)
Flow: Status of the flow control
Laser: Status of the Laser
Filter: Status of the Filter
See Chapter 5, "Troubleshooting," to resolve
any of these error conditions.

TSI Instruments dusttrak II 8530 Specifications

General

Brand	TSI Instruments
Model	dusttrak II 8530
Category	Measuring Instruments
Language	English