TSI Instruments FHC50 User Manual

Part Two
70
Troubleshooting Chart
Symptom
Possible Cause
Corrective Action
Error message
on display.
Internal error in
monitor or
controller.
Clear error using Self_Test item in DIAGNOSTICS menu.
If error recurs, return unit to factory.
Error messages:
 ADC Read Error
 Interrupt Fail Error
 Data C Checksum Error
 Data U Checksum Error
 I2C FRAM Write Error
 Flow Setup Data Error
 Control Calib Data Error
 AOut Calib Data Error
 AIn Calib Data Error
 Configuration Data Error
 Meter ID Data Error
 FRAM RD Meter ID Error
 FRAM RD User Config Error
 FRAM Rd Meas Cals Error FRAM
Rd Control Cal Error
 FRAM Rd Aout Cal Error
 FRAM Rd Ain Cal Error
 FRAM Rd Stored Errs Error
 FRAM Wr Stored Errs Error
 FRAM Wr Clear Errs Error
 FRAM Wr Changed Data Error
 FRAM Wr Clear FRAM Error
 Flow Calib Data Error
 Sash Position Calib Error
 Sash Sensor Calib Error
 Sash Area Calib Error
 Vel Calib Data Error

TSI Instruments FHC50 Specifications

General

Brand	TSI Instruments
Model	FHC50
Category	Controller
Language	English