u-blox NEO-8Q Series User Manual

UBX-15029985 Production Information Preface
Page 3 of 31
Preface
u-blox Technical Documentation
As part of our commitment to customer support, u-blox maintains an extensive volume of technical
documentation for our products. In addition to our product-specific technical data sheets, the following manuals
are available to assist u-blox customers in product design and development.
 GPS Compendium: This document, also known as the GPS book, provides a wealth of information
regarding generic questions about GPS system functionalities and technology.
 Receiver Description including Protocol Specification: This document describes messages, configuration
and functionalities of the NEO-8Q / NEO-M8 software releases and receivers.
 Hardware Integration Manuals: These manuals provide hardware design instructions and information on
how to set up production and final product tests.
 Application Notes: These documents provide general design instructions and information that applies to all
u-blox GNSS positioning modules.
How to use this Manual
This manual has a modular structure. It is not necessary to read it from beginning to end.
The following symbols highlight important information within the manual:
An index finger points out key information pertaining to module integration and performance.
A warning symbol indicates actions that could negatively influence or damage the module.
Questions
If you have any questions about NEO-8Q / NEO-M8 integration, please:
 Read this manual carefully.
 Contact our information service on the homepage http://www.u-blox.com.
 Read the questions and answers on our FAQ database on the homepage.
Technical Support
Worldwide Web
Our website (www.u-blox.com) is a rich pool of information. Product information, technical documents and
helpful FAQ can be accessed 24h a day.
By E-mail
If you have technical problems or cannot find the required information in the provided documents, contact the
closest Technical Support office. To ensure that we process your request as soon as possible, use our service pool
email addresses rather than personal staff email addresses. Contact details are at the end of the document.
Helpful Information when Contacting Technical Support
When contacting Technical Support please have the following information ready:
 Receiver type (e.g. NEO-M8N-0-10), Datacode (e.g. 180200.1000) and firmware version (e.g. FLASH FW
SPG3.01)
 Receiver/module configuration
 Clear description of your question or the problem (may include a u-center logfile)
 A short description of the application
 Your complete contact details

u-blox NEO-8Q Series Specifications

General

Brand	u-blox
Model	NEO-8Q Series
Category	Control Unit
Language	English