UNI-T UT803 User Manual

36
Sleep Mode
When the Meter display symbol, it automatically
turns off if you do not turn the rotary switch or press
any button for around 10 minutes to preserve battery.
The last measurement value will be kept.
The Meter can be activated by pressing the POWER
button off and then on or pressing the HOLD button, it
will display the last measurement value before it entered
sleep mode and under the HOLD mode.
Turning the rotary switch can also activate the Meter.
However, it will start from the switch selected function
and it will not display the last measurement value before
it entered sleep mode.
To disable the Sleep Mode function, press MAX MIN,
RANGE, or RS232 button while turning on the Meter,
the symbol disappears.
RS232 Button
Press RS232 button to enter or exit data output mode.
In RS232C serial port data output mode, the Hold and
Max Min mode cannot output to the computer, the
computer will only display the present measuring value.
In RS232C serial port data output mode, Sleep Mode
function will be disabled, symbol disappears. +DC,
hFE and β cannot output to the computer.
Model UT803: OPERATING MANUAL

UNI-T UT803 Specifications

General

Backlight	Yes
Product type	Digital multimeter
Frequency range	6 - 60000 kHz
AC current range	0.06 - 10 A
DC voltage range	0.6 - 1000 V
Capacitance range	6 - 6000 nF
Statistic function	Maximum, Minimum
Resolution (frequency)	100000 Hz
Resolution (AC current)	6000 µA
Basic accuracy (frequency)	±(0.1%+3)
Basic accuracy (DC current)	±(0.5%+3)
Basic accuracy (DC voltage)	±(0.3%+2)
Basic accuracy (resistance)	±(0.5%+2)
Basic accuracy (capacitance)	±(2%+5)
Temperature measurement range	-40 - 1000 °C
Dimensions (WxDxH)	310 x 240 x 105 mm
Battery voltage	1.5 V

Weight and Dimensions

Weight	2400 g