Unitech PA500 User Manual

28
Chapter 4
Managing Wireless Connections
Using the Wireless Manager
The Wireless Manager provides easy management to the wireless features on your device. This
program complements your device’s integrated wireless card and enabling you to turn the wireless features
on and off and allows for centralized management of the Wi-Fi and Bluetooth settings.
To open Wireless Manager:
Do any of the following:
• On the Today screen, tap Wireless Manager.
• On the navigation bar, tap the Data connectivity icon , then tap Wireless Manager from the
Connectivity drop-down box.
• Tap Start → Settings → Connections tab → Wireless Manager.
To activate wireless features
You can use Wireless Manager to turn the Wi-Fi and Bluetooth features on and off — one at a time or
all at the same time.
• To turn multiple wireless features on, open Wireless Manager, then tap All → Done.
• To activate Bluetooth via the Wireless Manager, tap Bluetooth → Done.
• To activate Wi-Fi via the Wireless Manager, tap Wi-Fi → Done.
Wireless Communications
Tap to launch
Wireless Manager.

Unitech PA500 Specifications

System Memory

SDRAM	64 MB
Flash ROM	64 MB

Display

display resolution	240x320 QVGA
display type	Color Transflective TFT
touch screen	yes

Laser Bar Code Scanner

scan rate	104 scans/sec ± 12 scans/sec
scan angle default	47°±3°
scan angle reduced	35°±3°

Power

main battery voltage	3.7 V
main battery capacity	2200 mAh
rechargeable time	3.5 hours

Operating Environment

operating temperature	32°F to 122°F (0°C to 50°C)
storage temperature	-4°F to 140°F (-20°C to 60°C)
relative humidity	5% ~ 95% (non-condensing)

Weight and Dimensions

weight with battery and scan engine	Under 213 g
length	126 mm
height	23 mm