Unitech PA600 Getting Started

Chapter 4 Bar Code Scanner Programs
38
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Chapter 4
Bar Code Scanner Programs
Scanner Setting
When it is necessary for the user to change the default bar code symbology for a dif-
ferent application, the Scanner Control Panel provides the ability to change the default
symbology, place delimiter characters behind scanned data and save scanner set-
tings.
Tap Start → Settings → System → Scanner.
Scan2Key
User’s can populate bar code scan data into any program of choice with the
Scan2Key application. Scan2Key routes input from a scanner port to a keypad buffer,
making all input from the scanner emulate input from the keypad. Using Scan2Key,
scanned data will move from the scanner port to any waiting (active/focused) text edi-
tor such as MS Mobile Word or a text box applicaton.

Unitech PA600 Specifications

System Memory

SDRAM memory	64 MB
Flash ROM	128 MB
Flash ROM with WWAN	320 MB

Display

display resolution	240x320 QVGA
display type	Color Transflective TFT
touch screen	Yes

Power

main battery	3.7V 1950mAh Li-Ion Battery Pack
backup battery	One Rechargeable Ni-MH Backup Battery
power source	Main Battery

Operating Environment

operating temperature	32ºF to 122ºF (0ºC to 50ºC)
storage temperature	-4ºF to 140ºF (-20ºC to 60ºC)
relative humidity	5% ~ 95% (non-condensing)

Weight and Dimensions

weight	290g with Battery & Scan Engine
length	149.5 mm
height	26.6 mm