Page | 24
SimpleSound
™
Total System Volume
Control Punch Through
SimpleSound gives you total volume control
over ALL the components in your system,
even those that do not have built—in volume
control, such as TIVO, DVD and VCR.
It saves you the hassle of switching between
component modes just to control volume.
STEP 1: Identify which device in your system
will be used to deliver sound. In a basic
system, the sound may come from your TV
speaker. In a more advanced system, the
sound may come from your audio components
(such as a Surround Sound Receiver or Home
Theatre system).
STEP 2: Press and hold the button that
corresponds to the Component you want to
add volume control to (such as a DVD or VCR)
and the SELECT (SEL) button at the same time
for about three seconds until the component
light turns on. Release the buttons.
COMPONENT
BUTTONS
SELECT
BUTTONS
To Next Page
Loading...
Need help?
General
