Universal Remote Control WR7 User Manual

Page | 32
Erasing MacroPower & Other Macro
Commands
STEP 1: To erase MacroPower commands
on the POWER [ON] or [SYSTEM OFF] button,
press and hold either the POWER [ON] or
[SYSTEM OFF] button and the [MUTE] button
simultaneously for two seconds until the current
status component LED turns on.
STEP 2: Press the CHANNEL UP [CH
5
]
button to erase and exit Erase mode. The
component LED light will blink three times to
confirm the erasure.
Note: If you do not press a button within 30
seconds, the component light will turn off.
The remote will exit the programming mode,
and you will have to start over with step one.
POWER
ON
SYSTEM
OFF
CHANNEL
UP
5
MUTE

Universal Remote Control WR7 Specifications

General

Brand	Universal Remote Control
Model	WR7
Category	Universal Remote
Language	English