Universal Remote Control WR7 User Manual

Page | 33
Erasing SimpleSound & Other Punch
Through Commands
STEP 1: Press and hold the Component button
you want to erase volume control from, such
as DVD or VCR and the SELECT [SEL] button
at the same time for two seconds until the
Component LED light turns on.
STEP 2: Press the VOLUME UP [VOL
5
]
button and the same component button
from Step 1. The component LED light will
blink three times to confirm the erasure.
Repeat Steps 1—2 to erase SimpleSound
commands from other components.
Note:
To erase other “punch through”
commands, simply press the following buttons
in place of VOLUME UP in Step 2:
• For Channel Control, press: CHANNEL
UP [CH
5
]
• For Transport Control, press: PLAY [
4
]
• For OSD Control, press: [MENU]
SELECT
VOLUME
UP
5
COMPONENT
BUTTONS

Universal Remote Control WR7 Specifications

General

Brand	Universal Remote Control
Model	WR7
Category	Universal Remote
Language	English