Utax CLP 3721 User Manual

3/5
5.) Pull out the shaft and remove the old
STOPPER HOOK.
6.) Attach SPRING STOPPER HOOK (No.2) to
the new STOPPER HOOK (No.1).
At that time, put the edge of SPRING (hooking
shape) on the bottom side of the new
STOPPER.
New STOPPER HOOK ASSY
7.) Attach the new STOPPER HOOK ASSY to the
cassette rear side.
At that time, put the edge of SPRING on the
cassette’s base.
Cassette rear side
Shaft
Old STOPPER HOOK
Backside of the left figure: Bottom side
New No.1. STOPPER HOOK
Added No.2. SPRING STOPPER HOOK
Put on the edge of SPRING
New STOPPER HOOK ASSY
Put the edge of SPRING on the base

Utax CLP 3721 Specifications

General

Brand	Utax
Model	CLP 3721
Category	Printer
Language	English