3/7
Step 2 - Adjustment Firmware und Firmware upgrade-
Download the Reset Firmware and then download the actuality Firmware Upgrade Pack.
Reset Firmware: CDC 1626, CDC 1726 / DCC 2626, DCC 2726
Download CDC1626_CDC1726_ResetFirmware_FW20120613
File 2KW_1000.CF5.001
CDC 5526, CDC 5626 / DCC 6526, DCC 6626
Download CDC5526_CDC5626_ResetFirmware_FW20120613
File 2KW_1000_CF5.001
CDC 5526L, CDC 5626L / DCC 6526L, DCC 6626L
Download CDC5526L_CDC5626L_ResetFirmware_FW20120613
File 2KW_1000_CF5.001
CLP 3721 / CLP 4721
Download CLP3721_ResetFirmware_FW20120613
File 2KT_1000_CF5.001
CLP 3726 / CLP 4726
Download CLP3726_ResetFirmware_FW20130613
File KV_1000.CF5.001
Attention! Prepare two USB sticks (one for the Reset FW and one for the Firmware Upgrade Pack) to execute.
Procedure:
1. Output the Maintenance Report or the Service Status Page to check the current engine firmware version.
2. Download the Reset firmware by the following procedures.
2-1. Insert a USB stick with the Reset Firmware into the machine, and turn the main power on.
2-2. After completing the download as shown in Fig.1, turn the main power off and disconnect the USB stick.
2-3. Turn the main power on and confirm [C9999] appears on the panel as in Fig.2.
2-4. Turn the main power off.
3. Download the Firmware Upgrade Pack by the following procedures.
3-1. Insert the USB stick with the Firmware Upgrade Pack into the machine and turn the main power on.
3-2. After completing the download as shown in Fig.1, confirm the engine firmware version is correct by pressing the upward
or downward key.
3-3. Turn the main power off and disconnect the USB stick.
4. Turn the main power on and output the Maintenance Report or the Service Status Page to confirm the firmware upgrade
is correctly done.
5. Print the color registration chart and manually adjust the color registration (detail) if necessary.
Fig.1 Fig.2
Note:
If downloading the firmware not by the
above procedures, the top and left
margins may be shifted.
or newer
To Next Page
Loading...
Need help?
General
