Sending Functions
5-21
5
Subject and Body Entry
When sending E-mail, enter the subject and body of the E-mail.
Use the procedure below to enter the subject and body for an E-mail message and then send the E-mail.
NOTE: Refer to Character Entry Method on Appendix-9 for details on entering characters.
1 Press the Send key.
2 Press the Function Menu key. Function Menu
appears.
3 Press the or key to select [Subject/Body].
4 Press the OK key. Subject Entry appears.
5 Enter the subject and press the OK key.
NOTE: Up to 60 characters can be entered for the
subject.
6 Enter the body and press the OK key.
NOTE: Up to 500 characters can be entered for the
body.
Completed. is displayed and the screen returns to
the basic screen for sending.
7 Specify the destination, and press the Start key to
start sending.